unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01[.3] 2 .xxx: .005[.13] .xxxx: .0020[.051] tolerances do not apply to reference dimensions. pb this product manufactured with lead-free processing do not scale from this print eedp-xxx-xx.xx-xxx-xxx-x no of pairs -008, -016, -024 (see sheet 5), -032 (see table 8, sheet 8) length -xx.xx (inches) (03.75[95.3] min) (see note 2) (see note 10) first end -dv1: double vertical -dv2: double vertical (flipped) -ds1: dv1 with captive panel screws -ds2: dv2 with captive panel screws -ra1: right angle (shroud up) -ra2: right angle (shroud down) -rs1: ra1 with captive panel screws -rs2: ra2 with captive panel screws -lv1: dv1 with latches (see sheet 7) -lv2: dv2 with latches (see sheet 7) -rl1: right angle w/ latches (shroud up) -rl2: right angle w/ latches (shroud down) (see sheet 2 &3 and table 9, sheet 8) second end wiring option -1: pin 1 to pin 1 -2: pin 1 to pin 2 -3: pin 1 to pin n-1 -4: pin 1 to pin n (see table 3, sheet 5 for -008, -016, -032; see table 5, sheet 6 for -024) -dv1: double vertical -dv2: double vertical (flipped) -ds1: dv1 with captive panel screws -ds2: dv2 with captive panel screws -ra1: right angle (shroud up) -ra2: right angle (shroud down) -rs1: ra1 with captive panel screws -rs2: ra2 with captive panel screws -lv1: dv1 with latches (see sheet 7) -lv2: dv2 with latches (see sheet 7) -rl1: right angle w/ latches (shroud up) -rl2: right angle w/ latches (shroud down) (see sheet 3 & 4 and table 9, sheet 8) length: xx.xx + .734[18.64] ref "c" ref "b" ref "a" ref .647 ref 16.43 (cable length) length: xx.xx 01% 'a' eedp-016-xx.xx-3-dv1-ra1 shown fig 1 second end first end 02 n (see table 2) 02 n (see table 2) sub-pcb-0453-eedp-xxx-ec-s (see note 7) c l .252 ref (typ) 6.40 .345 ref 8.76 .540 13.72 ref (typ) .062 1.57 ref edp-xx-01-srd (typ) sub-ttf-30100-xx-01-xx.xx (typ) edp-xx-01 .157 ref 4.00 (see note 8) 'b' sts-01 (tighten to 1.4 - 1.7 in-lbs) (typ) n-1 (see table 2) 01 n-1 (see table 2) 01 (see sheet 8) hdrl-11 (see note 5) length ref detail 'a' scale 2.5 : 1 r r sheet of material: twin-ax edge card cable assembly by: eedp-xxx-xx.xx-xxx-xxx-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 09/25/2003 9 1 sheet scale: 1.25:1 f:\dwg\misc\mktg\eedp-xxx-xx.xx-xxx-xxx-x-mkt.slddrw notes: 1. represents a critical dimension. 2. sub-ttf length is equal to eedp length. 3. all assemblies to be 100% electrically tested for shorts and opens. 4. all assemblies to be 100% hi-pot tested at 300v. 5. top sub-tts not shown in this view for clarity; hdrl-11 to be centered on lower sub-tts as shown; hdrl-11 is to contain part number, shop number, & date code. 6. for packaging requirements reference packaging standards. 7. for pre-tinning processing information on the sub-pcb's, see traveler sub-pcb-0453-eedp-"xxx". 8. key consumes four pitches. 9. lvx option: tighten to 1.4-1.5 in-lbs. 10. cable lengths longer than 40.00 inches are not supported by s.i. test data. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision r
-dv1 -ds1 -dv2 -ds2 -008 & -016 -ra2 -008 & -016 01 n-1 02 n 02 n 01 n-1 n 02 n-1 01 n-1 01 n 02 n 02 n-1 01 n-1 01 n 02 n 02 n-1 01 n-1 01 n 02 -024 & -032 n 02 n-1 01 -024 & -032 n-1 01 n 02 n 02 n-1 01 n-1 01 n 02 01 n-1 02 n n 02 n-1 01 01 n-1 02 n n 02 n-1 01 first end - (see table 3, sheet 5 for -008, -016 & -032; see table 5, sheet 6 for -024) -ra1 -rs1 -rs2 -008 & -016 -008 & -016 -024 & -032 -024 & -032 -lv1 -lv2 -008 & -016 -008 & -016 -024 & -032 -024 & -032 sheet of twin-ax edge card cable assembly by: eedp-xxx-xx.xx-xxx-xxx-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 09/25/2003 9 2 sheet scale: 1:2 revision r f:\dwg\misc\mktg\eedp-xxx-xx.xx-xxx-xxx-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
01 02 n n-1 02 01 n n-1 01 02 n n-1 02 01 n n-1 01 n-1 02 n n 02 n-1 01 02 n 01 n-1 n-1 01 n 02 n n-1 01 02 n-1 01 n 02 -dv1 -dv2 -ds1 -ds2 n 02 n-1 01 n-1 01 n 02 n 02 n-1 01 n-1 01 n 02 n 02 n-1 01 n-1 01 n 02 first end - (see table 3, sheet 5 for -008, -016 & -032; see table 5, sheet 6 for -024) -rl1 -024 & -032 -024 & -032 -008 & -016 -rl2 -008 & -016 -ra1 -008 & -016 -ra2 -008 & -016 -rs2 -rs1 -024 & -032 -024 & -032 -024 & -032 -024 & -032 -008 & -016 -008 & -016 r r r r r r sheet of twin-ax edge card cable assembly by: eedp-xxx-xx.xx-xxx-xxx-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 09/25/2003 9 3 sheet scale: 1:2 revision r f:\dwg\misc\mktg\eedp-xxx-xx.xx-xxx-xxx-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
01 02 n n-1 02 01 n n-1 01 n-1 02 n n 02 n-1 01 01 02 n n-1 02 01 n n-1 01 n-1 02 n n 02 n-1 01 second end - (see table 3, sheet 5 for -008, -016 & -032; see table 5, sheet 6 for -024) -rl1 -lv1 -lv2 -024 & -032 -024 & -032 -024 & -032 -008 & -016 -024 & -032 -008 & -016 -008 & -016 -008 & -016 r r r -rl2 r sheet of twin-ax edge card cable assembly by: eedp-xxx-xx.xx-xxx-xxx-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 09/25/2003 9 4 sheet scale: 1:2 revision r f:\dwg\misc\mktg\eedp-xxx-xx.xx-xxx-xxx-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
"e" ref "d" ref .500 ref (typ) 12.70 (fully tightened) "f" ref fig 2 -dsx: double vertical with captive panel screws (eedp-016-xx.xx-x-ds1-xxx shown) (same as fig 1, unless otherwise stated) cps-4-40-01-x (typ) l c edp-xx-01-cps (typ) l c fig 3 -rsx: right angle with captive panel screws (eedp-016-xx.xx-x-rs1-xxx shown) (same as fig 2, unless otherwise stated) l c edp-xx-01-ras l c edp-xx-01-cps sheet of twin-ax edge card cable assembly by: eedp-xxx-xx.xx-xxx-xxx-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 09/25/2003 9 5 sheet scale: 1:1 revision r f:\dwg\misc\mktg\eedp-xxx-xx.xx-xxx-xxx-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
"b" ref (see table 1, sheet 1) "a" ref (see table 1, sheet 1) "c" ref (see table 1, sheet 1) -024 pairs eedp-024-xx.xx-2-dv1-ra2 shown (same as fig 1, unless otherwise stated) fig 4 02 01 73 74 sub-ttf-30100-08-01-xx.xx (2 plcs) sub-ttf-30100-04-01-xx.xx (2 plcs) edp-xx-01-srd edp-xx-01-srd edp-xx-01 edp-xx-01-srd hdrl-11 (see note 5) sheet of twin-ax edge card cable assembly by: eedp-xxx-xx.xx-xxx-xxx-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 09/25/2003 9 6 sheet scale: 1.25:1 revision r f:\dwg\misc\mktg\eedp-xxx-xx.xx-xxx-xxx-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
'c' ledp-xx-01-t ledp-xx-01-b "j" .006 ref "h" 1.340 34.04 ref "g" fig 5 -lvx: double vertical with latches (eedp-016-xx.xx-x-lv2-xxx shown) (same as fig 1, unless otherwise stated) sts-01 tighten to 1.4-1.5 in-lbs. (typ) (see note 9) .354 9.00 in-process 1 add ltcb-xx to ltc-03-x ltcb-xx ltc-03-r ltcb-xx ltc-03-l detail 'c' scale 2.5 : 1 01 pos 1 in-process 2 verify pin 1 location on pcb prior to adding ledp housings 01 sheet of twin-ax edge card cable assembly by: eedp-xxx-xx.xx-xxx-xxx-x dwg. no. description: proprietary note do not scale drawing bratcher 09/25/2003 9 7 sheet scale: 1.25:1 revision r f:\dwg\misc\mktg\eedp-xxx-xx.xx-xxx-xxx-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc.
.017 ref 0.43 detail 'b' scale 5 : 1 (see table 6) ground signal sheet of twin-ax edge card cable assembly by: eedp-xxx-xx.xx-xxx-xxx-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 09/25/2003 9 8 sheet scale: 1.25:1 revision r f:\dwg\misc\mktg\eedp-xxx-xx.xx-xxx-xxx-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
"j" 1.340 34.04 ref ref "g" ref "h" fig 6 -rlx: right angle with latches (eedp-016-xx.xx-x-rl1-xxx shown) (same as fig 1, unless otherwise stated) .295 7.50 ledp-xx-01-r ledp-xx-01-m in-process 2 in-process 1 add ltcb-01 to ltc-03-x ltcb-01 ltc-03-r ltcb-01 ltc-03-l sheet of twin-ax edge card cable assembly by: eedp-xxx-xx.xx-xxx-xxx-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 09/25/2003 9 9 sheet scale: 1.25:1 revision r f:\dwg\misc\mktg\eedp-xxx-xx.xx-xxx-xxx-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
